E-WELD Shield is used in the field of plasma- and laser-cutting. It is easy to apply by means of the spray system and provides optimal surface protection. By coating the cutting benches, the ceramic additives contained in the product prevent major slag build-ups. At the same time, this slag is easier to remove, which means that cleaning the bars requires less time, making the system available for longer periods of time. In addition, costs are saved because the bars do not have to be replaced so often. The work pieces to be cut rest flat on the bars, which increases the quality of the cutting results. 

• Faster cleaning and longer use of the bars 
• Contains ceramic additives that prevent slag from building up 
• Economical: 1 kg of E-WELD Shield is usually sufficient for approx. 20 square metres
• No labelling required under the CLP Regulation 

Related links to "E-WELD Shield"

•  Do you have any questions concerning this product?
•  Further products by E-WELD Shield

Technical specification

Field of application

Coating for plasma- and laser-cutting benches

Usage

Mix the E-WELD Shield thoroughly before use, then apply a well-covering layer of E-WELD Shield to the new or cleaned bars; ideally repeat the process. Allow to dry for approx. 1 hour. Eliminate the slag after approx. 4 weeks, and apply a new layer of E-WELD Shield. 1 kg of E-WELD Shield is usually sufficient for approx. 20 square metres.